Carburo de Tungsteno Personalizado Resistente al Desgaste Preforma en Blanco Hoja de Carburo Cementado No Estándar
Nuestra chapa de preforma personalizada de carburo de tungsteno resistente al desgaste es una solución de primer nivel para diversas aplicaciones industriales. Fabricada con carburo cementado de alta calidad, ofrece una excepcional resistencia al desgaste, garantizando una larga vida útil incluso en condiciones de trabajo duras. Esta chapa no estándar puede adaptarse con precisión a tus necesidades específicas, ya sea para moldes especializados, piezas mecánicas u otros productos diseñados a medida. Su versatilidad y durabilidad la convierten en la opción ideal para las industrias que buscan materiales de alto rendimiento.
Excepcionales planchas de carburo de wolframio a medida para diversas necesidades industriales
Fabricada con precisión y materias primas de primera calidad, esta chapa tiene excelentes propiedades. Su resistencia a la corrosión se adapta a entornos corrosivos, su gran resistencia soporta cargas pesadas y su tolerancia a las altas temperaturas garantiza su estabilidad en condiciones de calor extremo.
En la industria metalúrgica, es perfecto para fabricar cuchillas de recorte para trenes de laminación de hierro fundido y de alto contenido en cromo-níquel. En estampación, se utiliza para placas separadoras, matrices de estampación y matrices progresivas electrónicas. Su resistencia al desgaste garantiza que los moldes produzcan muchos productos de alta calidad.
Características:
-
Excepcional resistencia al desgaste: Resiste la abrasión incluso en entornos de alta fricción, reduciendo la necesidad de sustituciones frecuentes.
-
Alta resistencia a la corrosión: Puede soportar la exposición a diversos productos químicos corrosivos, ácidos y álcalis, prolongando su vida útil.
-
Resistencia excepcional: Soporta presiones mecánicas extremas sin agrietarse ni deformarse, garantizando un rendimiento fiable bajo cargas pesadas.
-
Excelente tolerancia a las altas temperaturas: Mantiene su integridad estructural y sus propiedades mecánicas a altas temperaturas, por lo que es adecuado para procesos industriales de alta temperatura.
-
Personalizable según especificaciones no estándar: Adaptados para satisfacer tus requisitos exclusivos de dimensiones, forma y rendimiento, proporcionando una solución personalizada para tus proyectos.
-
Gran dureza: Garantiza una excelente capacidad de corte y conformado, ideal para aplicaciones en las que el mecanizado de precisión es crucial.
ESPECIFICACIONES DEL PRODUCTO
Material List
| Grade | Density (g/cm³)±0.1 | Cobalt Content (Co%)(±0.5%) | Grain Size | Hardness (HRA)±0.5 | Hardness (HV10) | Transverse Rupture Strength (kgf/mm²) | Application |
| YH08 | 14.95 | 6 | 1.0 | 92.5 | 1750 | 240 | Highly wear-resistant straight barrel powder metallurgy molds for ceramic clay. |
| YH06F | 14.75 | 7 | 0.8 | 93 | 1820 | 240 | |
| YH07F | 14.7 | 8 | 0.8 | 92.5 | 1750 | 250 | |
| YH10F | 14.45 | 10 | 0.8 | 91.5 | 1580 | 350 | Straight barrel forming and shaping molds |
| YH12F | 14.25 | 12 | 0.6 | 92.2 | 1700 | 300 | |
| YH13F | 14.1 | 13 | 0.8 | 90.5 | 1550 | 350 | lron-silicon-aluminum mold blanks with upper and lower punches. |
| GH20F | 13.9 | 15 | 0.8 | 90 | 1430 | 380 | |
| AH15A | 13.95 | 15 | 1.0 | 89.5 | 1350 | 380 | |
| GH12S | 14.10 | 12 | 1-3 | 89.7 | 1400 | 330 | |
| YH20 | 14.75 | 7 | 1-3 | 91 | 1520 | 280 | Wire drawing dies, magnetic material moldspowder metallurgy moldsand wear-resistant parts. |
| YH25 | 14.75 | 8 | 3.0 | 90.0 | 1450 | 290 | |
| YH30 | 14.55 | 9 | 1-3 | 91 | 1500 | 300 | |
| YH40 | 14.5 | 10 | 3.0 | 89.5 | 1350 | 320 | |
| GH05 | 14.35 | 12 | 3.0 | 88.5 | 1250 | 330 | Molds and mandrels for powder metallurgynon-standard structural components. |
| GH10 | 14.35 | 12 | 10.0 | 87.5 | 1150 | 330 | |
| GH15 | 14 | 15 | 3.0 | 87.5 | 1150 | 350 | |
| GH20 | 14 | 15 | 10.0 | 86 | 1050 | 350 | |
| GH40 | 13.6 | 20 | 10.0 | 84.5 | 950 | 310 | Spherical, thick-walled, and long punches. |
| GH50N | 13.4 | 22 | 10.0 | 83.5 | 850 | 290 | Spherical punches. |
| Grade | Co% (±0.5%) | Density (g/cm3 )±0.1 | Hardness (HRA) | Transverse Rupture Strength (kgf/mm²) | Impact Resistance (kgf- m/cm2) | Application | |
| HD02 | 23 | 13.07 | 82.0 | 230 | 0.95 | Stacked plates, flange bolts | |
| LG2 | 6 | 14.92 | 90.8 | 320 | 0.28 | Wear-resistant / Wire drawing die | |
| LG3 | 10 | 14.59 | 89.5 | 340 | 0.5 | Strong beam mold | |
| LG5 | 12 | 14.38 | 88.5 | 340 | 0.55 | ||
| LG6 | 15 | 14.09 | 87.5 | 320 | 0.62 | ||
| GH80 | 20 | 14.62 | 84.5 | 310 | 0.80 | Impact-resistant, large-diameter screw mold, nut upper mold, six-piece mold, screw first-strike mold, shear mold | |
| GH90 | 19 | 13.44 | 83.0 | 300 | 0.90 | Impact-resistant, nut mold (thin head type) | |
| GH95 | 20 | 13.27 | 82.0 | 290 | 0.92 | Impact-resistant, nut mold (thin head type)hot extrusion mold | |
| LT6 | 15 | 13.97 | 87.0 | 330 | 0.75 | Stainless steel, low single deformation, strong beam, ball head | |
| LT7 | 20 | 13.46 | 85.5 | 320 | 0.80 | Stainless steel F-head screw mold, screw, trumpet moldnecking first-strike, straight-hole mold (below 5mm aperture) | |
| LT7A | 19 | 13.54 | 86.0 | 300 | 0.75 | Strong beam, edge/neck shrinking, rivet stamping | |
| LT8 | 22 | 13.33 | 84.2 | 280 | 0.85 | Standard beam, support rod, full-tungsten first-strike | |
| LT10 | 23 | 13.25 | 83.5 | 260 | 0.93 | F-head straight-hole mold, trumpet-hole mold, serrated mold convex-head mold, straight-hole mold (for washers) | |
| LT10A | 21 | 13.24 | 83.0 | 250 | 0.85 | Triangle (with F-head), standard iron & large-head products | |
| YG20 | 19 | 13.57 | 86.5 | 300 | 0.60 | Base pad | |
| GH80 | 20 | 14.62 | 84.5 | 310 | 0.80 | Impact-resistant, large-diameter screw mold nut upper mold, six-piece mold, screw first-strike mold, shear mold | |
| GH90 | 19 | 13.44 | 83.5 | 300 | 0.90 | Impact-resistant, nut mold (thin head type) | |
| GH95 | 20 | 13.27 | 82.0 | 290 | 0.92 | Impact-resistant, nut mold (thin head type)hot extrusion mold | |
| Grade | Density (g/cm³)±0.1 | Cobalt Content (Co%)(±0.5%) | Grain Size | Hardness (HRA)±0.5 | Hardness (HV10) | Transverse Rupture Strength (kgf/mm²) | Application |
| YH08 | 14.95 | 6 | 1.0 | 92.5 | 1750 | 240 | Wire drawing dies, precision cutting of non-ferrous materialsand powder metallurgy molds for ceramic clay. |
| YH06F | 14.75 | 7 | 0.8 | 93.0 | 1820 | 240 | Plywood woodworking straight knives and powder metallurgy molds for ceramic clay. |
| YH07F | 14.70 | 8 | 0.8 | 92.5 | 1750 | 250 | Plywood woodworking straight knives and powder metallurgy molds for ceramic clay. |
| YH10F | 14.45 | 10 | 0.8 | 91.5 | 1580 | 350 | Cutting tools for plywood and solid wood (straight and shaped knives),round bar milling cutters, powder metallurgy molds, and drawing dies. |
| YH12F | 14.25 | 12 | 0.6 | 92.2 | 1700 | 300 | End mills, reamers, and other bar materials. |
| YH20 | 14.90 | 7 | 1-3 | 91.0 | 1520 | 280 | Wire drawing dies, powder metallurgy molds, wear-resistant parts and straight woodworking knives. |
| YH15 | 14.00 | 15 | 3.0 | 87.5 | 1150 | 350 | Stamping of aluminum and copper sheets, progressive dies,slitting knives, and powder metallurgy structural components. |
| YH25 | 14.75 | 8 | 3.0 | 90.0 | 1450 | 290 | Wire drawing dies, powder metallurgy intermediate molds, rolling rollers cement drills, wear-resistant parts, and tinplate can-making molds. |
| YH30 | 14.60 | 9 | 1-3 | 91.0 | 1500 | 300 | Powder metallurgy, deep drawing dies, wire drawing diesmagnetic material molds, and wear-resistant parts. |
| YH40 | 14.65 | 10 | 3.0 | 89.5 | 1360 | 320 | |
| GH04N | 14.80 | 5 | 0.8 | 93.8 | 1950 | 260 | Resistant to electrical corrosion, widely used in the gold and silver jewelry industry and copper wire industry. |
| GH05N | 14.50 | 7 | 0.6 | 92.8 | 1850 | 240 | |
| GH06N | 14.75 | 5 | 1.0 | 92.0 | 1750 | 280 | Resistant to electrical corrosion, widely used in rollers, the gold and silver jewelry industry, and the copper wire industry. |
| CN9A | 14.55 | Ni | 1.0 | 91.0 | 1550 | 280 | Non-magnetic. |
| CN14 | 14.10 | Ni | 2.0 | 87.0 | 1100 | 290 | |
| CN15 | 14.00 | Ni | 3.0 | 86.0 | 1000 | 290 | |
| Grade | Cobalt Content (Co%) | Density (g/cm³)±0.1 | Hardness (HRA) | Transverse Rupture Strength (kgf/mm²) | Fracture Toughness MPa.m1/2 | Application | |
| YH68N | 6 | 14.92 | 91.00 | 320.00 | 12.00 | Low adhesion, low adhesive wear | |
| GH13S | 12 | 14.10 | 89.50 | 380.00 | 17.00 | Strong cutting edge wear resistance | |
| GH12S | 12 | 14.14 | 90.80 | 360.00 | 16.00 | High wear resistance, high corrosion resistance | |
| AH15A | 15 | 13.98 | 89.50 | 380.00 | 17.00 | Excellent comprehensive performance | |
| GH16S | 19 | 13.51 | 87.50 | 310.00 | 15.00 | Complex shapes, thick plate stamping | |
| GH20F | 15 | 14.03 | 90.00 | 360.00 | 15.00 | Strong versatility | |
| AH15F | 15 | 13.98 | 89.60 | 370.00 | 15.00 | ||
| YH14F | 13 | 14.28 | 90.50 | 330.00 | 15.00 | Connector stamping, 3C hardware components | |
| AH12A | 12 | 14.35 | 91.50 | 390.00 | 12.00 | ||
| YH10F | 10 | 14.58 | 91.80 | 380.00 | 11.00 | ||
| YH12U | 12 | 14.17 | 92.20 | 330.00 | 8.00 | Lead frame, small punches | |
| Grade | Density (g/cm³)±0.1 | Cobalt Content (Co%)(±0.5%) | Grain Size | Hardness (HRA)±0.5 | Hardness (HV10) | Transverse Rupture Strength (kgf/mm²) | Application |
| YH06F | 14.75 | 7 | 0.8 | 93.0 | 1820 | 240 | Thermos cup stretching dies. |
| GH20F | 13.95 | 15 | 0.8 | 90.0 | 1430 | 380 | Battery punching rods. |
| YH20 | 14.75 | 7 | 1-3 | 91.0 | 1520 | 280 | Sleeves and drawing dies. |
| YH25 | 14.75 | 8 | 3.0 | 90.0 | 1450 | 290 | |
| YH30 | 14.55 | 9 | 1-3 | 91.0 | 1500 | 300 | |
| YH40 | 14.50 | 10 | 3.0 | 89.5 | 1350 | 320 | Deep drawing dies and drawing dies. |
A MEDIDA SEGÚN TU DEMANDA
PRODUCTOS RELACIONADOS
